Getting intumescent strips and smoke seals right in Halewood
For property owners, landlords and managing agents in Halewood, we offer intumescent strips and smoke seals with one team for the survey, the product and the installation.
Fire doors in Halewood protect escape routes in care homes, houses with integral garages and small blocks of flats alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Seal replacement in Halewood can be combined with any other remedials on the same inspection report. We check that each door in your Halewood building closes and latches against its new seals before signing it off.
Why seals fail
Seals are the most common defect on fire door inspections. They get painted over, pulled out, damaged by cleaning or simply worn by years of use. A painted brush seal no longer seals, and a strip of the wrong size may not close the gap in a fire. Our guide to seals explains the different types.
Each installation includes:
- Identification of the specified seals
- Intumescent pads to hinges and locks
- Check of gaps and closing after fitting
- Intumescent strips in frame or leaf edge
Which fire door rules apply in Halewood?
In Halewood, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Halewood building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Buildings and duty holders in Halewood
The need for intumescent strips and smoke seals usually arises in care homes or offices, and sometimes HMOs. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Halewood to keep escape routes protected throughout.
Our process in Halewood
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
Budgeting for intumescent strips and smoke seals in Halewood
Budget around £45–£110 per door to supply and fit strips and seals, ex VAT for intumescent strips and smoke seals. Our guide prices are the same in Halewood as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Halewood and neighbouring towns
Halewood is about 11.2 km from Liverpool, and we cover both, along with nearby Speke and Garston. Send us your postcode and we'll confirm survey dates.
Common questions
Is Halewood within your coverage area?
It is. We cover Halewood in Merseyside and neighbouring towns such as Speke. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can I just add intumescent strips to an ordinary door?
No. Strips do not turn an ordinary door into a fire door. They only work as part of a door that was tested and certified with them.
How long do seals last?
It depends on use and care. Seals on busy doors wear faster. Regular inspections will show when they need replacing.