Intumescent strips and smoke seals: our service in Liverpool
When you book intumescent strips and smoke seals in Liverpool, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Liverpool has a broad mix of buildings, including student accommodation, clinics and shared houses, and the same fire door principles apply to all of them.
Painted and missing seals are among the most common fire door defects nationally; in Liverpool we replace them with the type and size the certification specifies. Seal replacement in Liverpool can be combined with any other remedials on the same inspection report.
Pads, linings and hidden protection
Fire doors also rely on intumescent material you cannot see: pads behind hinges, linings around lock bodies and glazing seals. Where these are missing or damaged, we fit the correct items as part of the work.
On a typical job that means:
- Removal of damaged or painted seals
- Check of gaps and closing after fitting
- Intumescent strips in frame or leaf edge
- Brush or blade smoke seals
Rules and responsibilities in Liverpool
The rules that apply to fire doors in Liverpool are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Liverpool block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs intumescent strips and smoke seals in Liverpool?
The need for intumescent strips and smoke seals usually arises in schools or HMOs, and sometimes blocks of flats. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Liverpool to keep escape routes protected throughout.
How a Liverpool job runs
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
Prices for intumescent strips and smoke seals in Liverpool
Guide pricing for intumescent strips and smoke seals: £45–£110 per door to supply and fit strips and seals, ex VAT. Volume work across several doors in one Liverpool building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Covering Liverpool and nearby
As well as Liverpool, we cover neighbouring towns including Birkenhead, Wallasey and Litherland. The survey and quote are free.
Questions from Liverpool
Do you cover L3 and nearby postcodes?
Yes. We cover Liverpool including L3, and nearby towns such as Birkenhead and Wallasey. The survey and written quote are free.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
How long do seals last?
It depends on use and care. Seals on busy doors wear faster. Regular inspections will show when they need replacing.
Can I just add intumescent strips to an ordinary door?
No. Strips do not turn an ordinary door into a fire door. They only work as part of a door that was tested and certified with them.