What intumescent strips and smoke seals in Coalville should include
We provide intumescent strips and smoke seals in Coalville (LE67 and the surrounding postcodes), from the first survey through to a documented handover.
Around Coalville, light industrial buildings, small offices and family homes after loft conversions all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Seal replacement in Coalville can be combined with any other remedials on the same inspection report. We check that each door in your Coalville building closes and latches against its new seals before signing it off.
Why seals fail
Seals are the most common defect on fire door inspections. They get painted over, pulled out, damaged by cleaning or simply worn by years of use. A painted brush seal no longer seals, and a strip of the wrong size may not close the gap in a fire. Our guide to seals explains the different types.
Each installation includes:
- Removal of damaged or painted seals
- Intumescent strips in frame or leaf edge
- Identification of the specified seals
- Check of gaps and closing after fitting
Which fire door rules apply in Coalville?
England's framework applies in Coalville. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Coalville, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Where intumescent strips and smoke seals fit in Coalville
Typical settings for intumescent strips and smoke seals include blocks of flats, HMOs and care homes. In Coalville, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
Our process in Coalville
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
What does intumescent strips and smoke seals cost in Coalville?
If you need a budget figure first, the guide for intumescent strips and smoke seals is £45–£110 per door to supply and fit strips and seals, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Coalville
Coalville is about 18.6 km from Leicester, and we cover both, along with nearby Loughborough and Swadlincote. Send us your postcode and we'll confirm survey dates.
Common questions
Do you cover LE67 and nearby postcodes?
Yes. We cover Coalville including LE67, and nearby towns such as Loughborough and Swadlincote. The survey and written quote are free.
What happens on a survey in Coalville?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can I just add intumescent strips to an ordinary door?
No. Strips do not turn an ordinary door into a fire door. They only work as part of a door that was tested and certified with them.
How long do seals last?
It depends on use and care. Seals on busy doors wear faster. Regular inspections will show when they need replacing.