What fire door frames in Coalville should include
Our fire door frames service in Coalville is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Buildings in and around Coalville range from schools to small blocks of flats and light industrial buildings. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Frame-to-wall gaps on Coalville jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out. In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Coalville survey.
BS 8214:2026 and the frame-to-wall gap
The 2026 revision of BS 8214 strengthened its guidance on sealing the gap between the frame and the surrounding structure, listing material types such as stone wool, mastic and fire-rated foam, and putting the emphasis on using what the evidence supports. We fill and seal that gap with materials covered by the doorset's or sealant's test evidence and photograph it before the architraves go back on.
Each installation includes:
- Frame-to-wall gap sealing with evidenced materials
- Fixing at specified centres with packing
- Photographs of fixing and sealing before covering
- Architraves and making good
Rules and responsibilities in Coalville
England's framework applies in Coalville. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Coalville, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Which buildings in Coalville need fire door frames?
Landlords, managing agents, facilities teams and homeowners in Coalville can all commission fire door frames from us. The usual settings are older blocks of flats and schools, though single doors for offices are just as welcome.
What happens after you enquire
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
What does fire door frames cost in Coalville?
If you need a budget figure first, the guide for fire door frames is £250–£600 per frame replaced, fixed and sealed, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Coalville
Coalville is about 18.6 km from Leicester, and we cover both, along with nearby Loughborough and Swadlincote. Send us your postcode and we'll confirm survey dates.
Common questions
Do you work in Coalville?
Yes, we take on fire door frames in Coalville and the surrounding area, including Loughborough and Swadlincote. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Coalville building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.