Getting intumescent strips and smoke seals right in Morecambe
From the LA4 postcode district outwards, we take on intumescent strips and smoke seals across Morecambe for homes, blocks and workplaces.
Fire doors in Morecambe protect escape routes in houses with integral garages, HMOs and family homes after loft conversions alike. We adapt the programme to the building and its occupants, never the standard of the installation.
We check that each door in your Morecambe building closes and latches against its new seals before signing it off. Painted and missing seals are among the most common fire door defects nationally; in Morecambe we replace them with the type and size the certification specifies.
Getting the specification right
The door's certification states the type, size and position of strips and seals: in the frame or the leaf edge, single or double, and whether a combined intumescent and smoke seal is used. Replacements must match. Swapping in a generic strip from a hardware shop can undermine the door's performance.
As standard, the work covers:
- Identification of the specified seals
- Intumescent strips in frame or leaf edge
- Check of gaps and closing after fitting
- Removal of damaged or painted seals
What the rules say for Morecambe
England's framework applies in Morecambe. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Morecambe, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Where intumescent strips and smoke seals fit in Morecambe
From care homes to blocks of flats, the requirement for intumescent strips and smoke seals in Morecambe comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
What happens after you enquire
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
What does intumescent strips and smoke seals cost in Morecambe?
Budget around £45–£110 per door to supply and fit strips and seals, ex VAT for intumescent strips and smoke seals. Our guide prices are the same in Morecambe as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Nearby areas we cover from Morecambe
We also cover towns near Morecambe, including Lancaster (4.7 km away), Fleetwood and Thornton-Cleveleys. If your building is in LA4 or a neighbouring district, the service and pricing are the same.
Questions from Morecambe
Is Morecambe within your coverage area?
It is. We cover Morecambe in Lancashire and neighbouring towns such as Lancaster. There is no charge for the survey.
How quickly can you survey in Morecambe?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Can smoke seals be painted?
No. Paint stops brush and blade seals working. If seals have been painted, they should be replaced.
Do all fire doors need smoke seals?
Only where the door is specified for smoke control, such as FD30S doors. Many doors on escape routes and flat entrances are specified this way.