Intumescent strips and smoke seals in Accrington: what's involved
If you need intumescent strips and smoke seals in Accrington, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Fire doors in Accrington protect escape routes in small offices, houses with integral garages and small blocks of flats alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Painted and missing seals are among the most common fire door defects nationally; in Accrington we replace them with the type and size the certification specifies. Seal replacement in Accrington can be combined with any other remedials on the same inspection report.
Why seals fail
Seals are the most common defect on fire door inspections. They get painted over, pulled out, damaged by cleaning or simply worn by years of use. A painted brush seal no longer seals, and a strip of the wrong size may not close the gap in a fire. Our guide to seals explains the different types.
As standard, the work covers:
- Check of gaps and closing after fitting
- Brush or blade smoke seals
- Identification of the specified seals
- Removal of damaged or painted seals
What the rules say for Accrington
In Accrington, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Accrington building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Who needs intumescent strips and smoke seals in Accrington?
The need for intumescent strips and smoke seals usually arises in HMOs or blocks of flats, and sometimes schools. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Accrington to keep escape routes protected throughout.
How a Accrington job runs
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
Prices for intumescent strips and smoke seals in Accrington
Guide pricing for intumescent strips and smoke seals: £45–£110 per door to supply and fit strips and seals, ex VAT. Volume work across several doors in one Accrington building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Accrington
Nearby towns we cover include Rawtenstall, Blackburn and Darwen. Distance from Accrington does not change our guide prices, and the survey and quote are free.
Questions
Do you work in Accrington?
Yes, we take on intumescent strips and smoke seals in Accrington and the surrounding area, including Rawtenstall and Blackburn. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Accrington?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can smoke seals be painted?
No. Paint stops brush and blade seals working. If seals have been painted, they should be replaced.
Can I just add intumescent strips to an ordinary door?
No. Strips do not turn an ordinary door into a fire door. They only work as part of a door that was tested and certified with them.