Intumescent strips and smoke seals in Colchester

Intumescent strips and smoke seals in Colchester, done to the evidence

Looking for intumescent strips and smoke seals in Colchester? We supply and fit certified fire doors and components across Colchester and the wider Essex area, working from a free survey and a fixed written quote.

Buildings in and around Colchester range from care homes to schools and industrial units. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

Painted and missing seals are among the most common fire door defects nationally; in Colchester we replace them with the type and size the certification specifies. Seal replacement in Colchester can be combined with any other remedials on the same inspection report.

Getting the specification right

The door's certification states the type, size and position of strips and seals: in the frame or the leaf edge, single or double, and whether a combined intumescent and smoke seal is used. Replacements must match. Swapping in a generic strip from a hardware shop can undermine the door's performance.

Each installation includes:

• Intumescent strips in frame or leaf edge
• Removal of damaged or painted seals
• Identification of the specified seals
• Check of gaps and closing after fitting

Rules and responsibilities in Colchester

In Colchester, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.

Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Colchester building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.

Who needs intumescent strips and smoke seals in Colchester?

You are most likely to need intumescent strips and smoke seals if you look after offices, care homes or HMOs. Whatever the building in Colchester, we survey each opening and tell you which doors need work and which do not.

What happens after you enquire

1. Identify door certification and seal specification
2. Remove failed seals and clean the grooves
3. Fit new strips and seals to the specified positions
4. Fit missing pads and lock linings
5. Check the door closes and latches against the new seals
6. Record the products fitted

What does intumescent strips and smoke seals cost in Colchester?

If you need a budget figure first, the guide for intumescent strips and smoke seals is £45–£110 per door to supply and fit strips and seals, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Around Colchester

Colchester is about 41.2 km from Southend-on-Sea, and we cover both, along with nearby Sudbury and Clacton-on-Sea. Send us your postcode and we'll confirm survey dates.

Common questions