Intumescent strips and smoke seals in Sudbury

Intumescent strips and smoke seals in Sudbury, done to the evidence

We provide intumescent strips and smoke seals in Sudbury (CO10 and the surrounding postcodes), from the first survey through to a documented handover.

Sudbury has a broad mix of buildings, including small blocks of flats, houses with integral garages and family homes after loft conversions, and the same fire door principles apply to all of them.

We check that each door in your Sudbury building closes and latches against its new seals before signing it off. Painted and missing seals are among the most common fire door defects nationally; in Sudbury we replace them with the type and size the certification specifies.

Pads, linings and hidden protection

Fire doors also rely on intumescent material you cannot see: pads behind hinges, linings around lock bodies and glazing seals. Where these are missing or damaged, we fit the correct items as part of the work.

What you get:

• Identification of the specified seals
• Check of gaps and closing after fitting
• Intumescent strips in frame or leaf edge
• Brush or blade smoke seals

What the rules say for Sudbury

In Sudbury, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.

Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Sudbury building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.

Buildings and duty holders in Sudbury

The need for intumescent strips and smoke seals usually arises in schools or offices, and sometimes care homes. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Sudbury to keep escape routes protected throughout.

From enquiry to handover in Sudbury

1. Identify door certification and seal specification
2. Remove failed seals and clean the grooves
3. Fit new strips and seals to the specified positions
4. Fit missing pads and lock linings
5. Check the door closes and latches against the new seals
6. Record the products fitted

What does intumescent strips and smoke seals cost in Sudbury?

Budget around £45–£110 per door to supply and fit strips and seals, ex VAT for intumescent strips and smoke seals. Our guide prices are the same in Sudbury as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Nearby areas we cover from Sudbury

Neighbouring towns such as Colchester, Haverhill, Braintree and Bury St Edmunds are covered too, so clients with several buildings can use one installer and one evidence format.

Questions