Fire door supply and fitting in England, Wales, Scotland and Northern Ireland sales@firedoor-installation.comGuide prices
Fire Door Installation

Intumescent strip and smoke seal fitting in Dyfed

Replacing and fitting intumescent strips, smoke seals and pads to the door's certification. Available throughout Dyfed, with a free survey and fixed written quote.

Quote for Dyfed

Free survey and a fixed written quote.

Prefer to talk? Call 0800 088 6248.

Intumescent strips and smoke seals in Dyfed: what's involved

We provide intumescent strips and smoke seals across Dyfed, covering 41 postcode districts from SA14 to SY25.

Seal replacement in Dyfed can be combined with any other remedials on the same inspection report. Painted and missing seals are among the most common fire door defects nationally; in Dyfed we replace them with the type and size the certification specifies.

Dyfed has a mix of buildings, from purpose-built blocks to converted houses and commercial premises. We tailor the programme to the building, not the other way round.

Pads, linings and hidden protection

Fire doors also rely on intumescent material you cannot see: pads behind hinges, linings around lock bodies and glazing seals. Where these are missing or damaged, we fit the correct items as part of the work.

The regulations behind fire doors in Dyfed

Dyfed is in Wales, where new and replacement fire doors are covered by the Building Regulations 2010 as applied in Wales, with the Welsh Approved Document B as guidance. The Regulatory Reform (Fire Safety) Order 2005 also applies, so responsible persons in workplaces and the common parts of blocks must keep fire doors maintained.

One difference from England: regulation 10 of the Fire Safety (England) Regulations 2022, with its quarterly and annual fire door checks, does not apply in Wales. Your fire risk assessment sets the checking regime instead, and we work to it.

What happens after you enquire

  1. Identify door certification and seal specification
  2. Remove failed seals and clean the grooves
  3. Fit new strips and seals to the specified positions
  4. Fit missing pads and lock linings
  5. Check the door closes and latches against the new seals
  6. Record the products fitted

What does intumescent strips and smoke seals cost in Dyfed?

Guide pricing for intumescent strips and smoke seals: £45–£110 per door to supply and fit strips and seals, ex VAT. Volume work across several doors in one Dyfed building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Common questions

Do you provide intumescent strips and smoke seals across Dyfed?

Yes. We cover all of Dyfed, including Llanelli and Ammanford. Surveys and written quotes are free.

Can smoke seals be painted?

No. Paint stops brush and blade seals working. If seals have been painted, they should be replaced.

Can I just add intumescent strips to an ordinary door?

No. Strips do not turn an ordinary door into a fire door. They only work as part of a door that was tested and certified with them.

Intumescent strips and smoke seals by town in Dyfed

Book a free survey in Dyfed

Tell us about the doors and we will come back with survey dates and a fixed written quote.

CallGet a quote