What intumescent strips and smoke seals in Chesham should include
For property owners, landlords and managing agents in Chesham, we offer intumescent strips and smoke seals with one team for the survey, the product and the installation.
Buildings in and around Chesham range from houses with integral garages to light industrial buildings and small offices. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
We check that each door in your Chesham building closes and latches against its new seals before signing it off. Painted and missing seals are among the most common fire door defects nationally; in Chesham we replace them with the type and size the certification specifies.
Getting the specification right
The door's certification states the type, size and position of strips and seals: in the frame or the leaf edge, single or double, and whether a combined intumescent and smoke seal is used. Replacements must match. Swapping in a generic strip from a hardware shop can undermine the door's performance.
Each installation includes:
- Brush or blade smoke seals
- Removal of damaged or painted seals
- Identification of the specified seals
- Intumescent strips in frame or leaf edge
Fire door law for Chesham properties
In Chesham, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Chesham building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Where intumescent strips and smoke seals fit in Chesham
From offices to care homes, the requirement for intumescent strips and smoke seals in Chesham comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
From enquiry to handover in Chesham
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
Guide prices in Chesham
As a guide, budget £45–£110 per door to supply and fit strips and seals, ex VAT for intumescent strips and smoke seals. The figure for your Chesham building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Nearby areas we cover from Chesham
Chesham is about 39.5 km from Milton Keynes, and we cover both, along with nearby Amersham and Berkhamsted. Send us your postcode and we'll confirm survey dates.
Questions from Chesham
Is Chesham within your coverage area?
It is. We cover Chesham in Buckinghamshire and neighbouring towns such as Amersham. There is no charge for the survey.
What happens on a survey in Chesham?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
How long do seals last?
It depends on use and care. Seals on busy doors wear faster. Regular inspections will show when they need replacing.
Can smoke seals be painted?
No. Paint stops brush and blade seals working. If seals have been painted, they should be replaced.