Intumescent strips and smoke seals in Aylesbury

Intumescent strips and smoke seals: our service in Aylesbury

When you book intumescent strips and smoke seals in Aylesbury, the aim is simple: doors that close, latch and seal as tested, with records that prove it.

In and around Aylesbury, fire door work covers everything from HMOs to care homes. We plan each job around the people who use the building.

Painted and missing seals are among the most common fire door defects nationally; in Aylesbury we replace them with the type and size the certification specifies. Seal replacement in Aylesbury can be combined with any other remedials on the same inspection report.

Why seals fail

Seals are the most common defect on fire door inspections. They get painted over, pulled out, damaged by cleaning or simply worn by years of use. A painted brush seal no longer seals, and a strip of the wrong size may not close the gap in a fire. Our guide to seals explains the different types.

Each installation includes:

• Intumescent pads to hinges and locks
• Intumescent strips in frame or leaf edge
• Identification of the specified seals
• Check of gaps and closing after fitting

Which fire door rules apply in Aylesbury?

England's framework applies in Aylesbury. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Aylesbury, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Which buildings in Aylesbury need intumescent strips and smoke seals?

You are most likely to need intumescent strips and smoke seals if you look after blocks of flats, schools or care homes. Whatever the building in Aylesbury, we survey each opening and tell you which doors need work and which do not.

How a Aylesbury job runs

1. Identify door certification and seal specification
2. Remove failed seals and clean the grooves
3. Fit new strips and seals to the specified positions
4. Fit missing pads and lock linings
5. Check the door closes and latches against the new seals
6. Record the products fitted

Budgeting for intumescent strips and smoke seals in Aylesbury

As a guide, budget £45–£110 per door to supply and fit strips and seals, ex VAT for intumescent strips and smoke seals. The figure for your Aylesbury building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Around Aylesbury

Aylesbury is about 25.3 km from Milton Keynes, and we cover both, along with nearby Leighton Buzzard and Berkhamsted. Send us your postcode and we'll confirm survey dates.

Questions