Intumescent strips and smoke seals in Rickmansworth

Intumescent strips and smoke seals: our service in Rickmansworth

When you book intumescent strips and smoke seals in Rickmansworth, the aim is simple: doors that close, latch and seal as tested, with records that prove it.

Buildings in and around Rickmansworth range from care homes to small offices and small blocks of flats. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

We check that each door in your Rickmansworth building closes and latches against its new seals before signing it off. Painted and missing seals are among the most common fire door defects nationally; in Rickmansworth we replace them with the type and size the certification specifies.

Why seals fail

Seals are the most common defect on fire door inspections. They get painted over, pulled out, damaged by cleaning or simply worn by years of use. A painted brush seal no longer seals, and a strip of the wrong size may not close the gap in a fire. Our guide to seals explains the different types.

As standard, the work covers:

• Identification of the specified seals
• Brush or blade smoke seals
• Check of gaps and closing after fitting
• Removal of damaged or painted seals

Rules and responsibilities in Rickmansworth

The rules that apply to fire doors in Rickmansworth are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.

Where a Rickmansworth block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Which buildings in Rickmansworth need intumescent strips and smoke seals?

From blocks of flats to schools, the requirement for intumescent strips and smoke seals in Rickmansworth comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

What happens after you enquire

1. Identify door certification and seal specification
2. Remove failed seals and clean the grooves
3. Fit new strips and seals to the specified positions
4. Fit missing pads and lock linings
5. Check the door closes and latches against the new seals
6. Record the products fitted

What does intumescent strips and smoke seals cost in Rickmansworth?

If you need a budget figure first, the guide for intumescent strips and smoke seals is £45–£110 per door to supply and fit strips and seals, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Nearby areas we cover from Rickmansworth

Nearby towns we cover include Watford, Chalfont St Peter and North Watford. Distance from Rickmansworth does not change our guide prices, and the survey and quote are free.

Questions