What fire door hold-open devices in Wellingborough should include
From the NN8 postcode district outwards, we take on fire door hold-open devices across Wellingborough for homes, blocks and workplaces.
Fire doors in Wellingborough protect escape routes in industrial estates, HMOs and high-street shops alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Where doors in Wellingborough care homes, schools or offices are being wedged open, a hold-open device is the safe fix. We coordinate with your fire alarm contractor in Wellingborough so every hold-open releases when it should.
Why doors get wedged
Busy corridors, care homes and schools have doors that people need open all day. If there is no safe way to hold them, they get wedged, which defeats the door completely. A hold-open device or free-swing closer solves the problem properly.
What you get:
- Coordination of alarm interface
- Electromagnetic holders to BS EN 1155
- Hold-open and free-swing closers
- Assessment of door use and alarm system
Which fire door rules apply in Wellingborough?
The rules that apply to fire doors in Wellingborough are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Wellingborough block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Which buildings in Wellingborough need fire door hold-open devices?
Typical settings for fire door hold-open devices include communal corridors, schools and clinics. In Wellingborough, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
From enquiry to handover in Wellingborough
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Budgeting for fire door hold-open devices in Wellingborough
As a guide, budget £180–£450 per door for the device, excluding fire alarm interface work, ex VAT for fire door hold-open devices. The figure for your Wellingborough building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Covering Wellingborough and nearby
Nearby towns we cover include Rushden, Kettering and Northampton. Distance from Wellingborough does not change our guide prices, and the survey and quote are free.
Common questions
Is Wellingborough within your coverage area?
It is. We cover Wellingborough in Northamptonshire and neighbouring towns such as Rushden. There is no charge for the survey.
Can you work from an existing inspection report for my Wellingborough building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Do hold-open devices need the fire alarm?
Hard-wired devices are released by the fire alarm system. Some battery units detect the alarm sound instead; they must be suitable for the building and its alarm.
Is it legal to wedge open a fire door?
Wedging a fire door open defeats its purpose and is likely to breach the duties under fire safety law. A hold-open device that releases on alarm is the safe alternative.