Fire door hold-open devices in Corby, done to the evidence
We provide fire door hold-open devices in Corby (NN17 and the surrounding postcodes), from the first survey through to a documented handover.
Around Corby, HMOs, care homes and low-rise blocks of flats all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Where doors in Corby care homes, schools or offices are being wedged open, a hold-open device is the safe fix. We coordinate with your fire alarm contractor in Corby so every hold-open releases when it should.
Working with your alarm contractor
Hard-wired hold-opens need an interface with the fire alarm, which is usually designed and certified by your fire alarm contractor. We fit and commission the door side and coordinate the interface, then test that every device releases when the alarm operates.
On a typical job that means:
- Hold-open and free-swing closers
- Release testing with the alarm
- Electromagnetic holders to BS EN 1155
- Coordination of alarm interface
The regulations behind fire doors in Corby
Fire doors in Corby fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Corby above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Who needs fire door hold-open devices in Corby?
From offices to schools, the requirement for fire door hold-open devices in Corby comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
From enquiry to handover in Corby
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
What does fire door hold-open devices cost in Corby?
As a guide, budget £180–£450 per door for the device, excluding fire alarm interface work, ex VAT for fire door hold-open devices. The figure for your Corby building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Corby and neighbouring towns
Nearby towns we cover include Kettering, Market Harborough and Wellingborough. Distance from Corby does not change our guide prices, and the survey and quote are free.
Common questions
Do you work in Corby?
Yes, we take on fire door hold-open devices in Corby and the surrounding area, including Kettering and Market Harborough. Send your postcode and a few details and we'll come back with survey dates.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Do hold-open devices need the fire alarm?
Hard-wired devices are released by the fire alarm system. Some battery units detect the alarm sound instead; they must be suitable for the building and its alarm.
Who tests hold-open devices?
They should be tested with the fire alarm as part of the routine testing arrangements. We test them at installation and record the results.