Fire door hold-open devices in Deal: what's involved
If you need fire door hold-open devices in Deal, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Around Deal, small blocks of flats, light industrial buildings and family homes after loft conversions all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Where doors in Deal care homes, schools or offices are being wedged open, a hold-open device is the safe fix. We coordinate with your fire alarm contractor in Deal so every hold-open releases when it should.
Why doors get wedged
Busy corridors, care homes and schools have doors that people need open all day. If there is no safe way to hold them, they get wedged, which defeats the door completely. A hold-open device or free-swing closer solves the problem properly.
On a typical job that means:
- Assessment of door use and alarm system
- Record of devices and test results
- Release testing with the alarm
- Coordination of alarm interface
The regulations behind fire doors in Deal
England's framework applies in Deal. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Deal, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Which buildings in Deal need fire door hold-open devices?
The need for fire door hold-open devices usually arises in offices or schools, and sometimes communal corridors. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Deal to keep escape routes protected throughout.
What happens after you enquire
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Budgeting for fire door hold-open devices in Deal
Guide pricing for fire door hold-open devices: £180–£450 per door for the device, excluding fire alarm interface work, ex VAT. Volume work across several doors in one Deal building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Deal
Deal is about 61.9 km from Maidstone, and we cover both, along with nearby Dover and Ramsgate. Send us your postcode and we'll confirm survey dates.
Common questions
Is Deal within your coverage area?
It is. We cover Deal in Kent and neighbouring towns such as Dover. There is no charge for the survey.
How quickly can you survey in Deal?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Is it legal to wedge open a fire door?
Wedging a fire door open defeats its purpose and is likely to breach the duties under fire safety law. A hold-open device that releases on alarm is the safe alternative.
Do hold-open devices need the fire alarm?
Hard-wired devices are released by the fire alarm system. Some battery units detect the alarm sound instead; they must be suitable for the building and its alarm.