Fire door hold-open devices: our service in Long Eaton
Our fire door hold-open devices service in Long Eaton is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Buildings in and around Long Eaton range from houses with integral garages to small blocks of flats and family homes after loft conversions. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Where doors in Long Eaton care homes, schools or offices are being wedged open, a hold-open device is the safe fix. We coordinate with your fire alarm contractor in Long Eaton so every hold-open releases when it should.
Working with your alarm contractor
Hard-wired hold-opens need an interface with the fire alarm, which is usually designed and certified by your fire alarm contractor. We fit and commission the door side and coordinate the interface, then test that every device releases when the alarm operates.
As standard, the work covers:
- Hold-open and free-swing closers
- Release testing with the alarm
- Electromagnetic holders to BS EN 1155
- Assessment of door use and alarm system
Fire door law for Long Eaton properties
England's framework applies in Long Eaton. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Long Eaton, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Who needs fire door hold-open devices in Long Eaton?
Landlords, managing agents, facilities teams and homeowners in Long Eaton can all commission fire door hold-open devices from us. The usual settings are offices and communal corridors, though single doors for schools are just as welcome.
Our process in Long Eaton
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
What does fire door hold-open devices cost in Long Eaton?
Guide pricing for fire door hold-open devices: £180–£450 per door for the device, excluding fire alarm interface work, ex VAT. Volume work across several doors in one Long Eaton building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Long Eaton
Neighbouring towns such as Ilkeston, Nottingham, West Bridgford and Heanor are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Is Long Eaton within your coverage area?
It is. We cover Long Eaton in Derbyshire and neighbouring towns such as Ilkeston. There is no charge for the survey.
What happens on a survey in Long Eaton?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Is it legal to wedge open a fire door?
Wedging a fire door open defeats its purpose and is likely to breach the duties under fire safety law. A hold-open device that releases on alarm is the safe alternative.
What is the difference between a hold-open and a free-swing closer?
A hold-open keeps the door at a fixed open position. A free-swing closer lets the door move freely, as if no closer were fitted, until the alarm sounds.