Fire door hold-open devices: our service in Buckinghamshire
Across Buckinghamshire, from Milton Keynes to High Wycombe, we survey, supply and fit fire door hold-open devices for homes, blocks of flats and workplaces.
We coordinate with your fire alarm contractor in Buckinghamshire so every hold-open releases when it should. Where doors in Buckinghamshire care homes, schools or offices are being wedged open, a hold-open device is the safe fix.
Buckinghamshire has a mix of buildings, from purpose-built blocks to converted houses and commercial premises. We tailor the programme to the building, not the other way round.
Working with your alarm contractor
Hard-wired hold-opens need an interface with the fire alarm, which is usually designed and certified by your fire alarm contractor. We fit and commission the door side and coordinate the interface, then test that every device releases when the alarm operates.
Which fire door rules apply in Buckinghamshire?
Fire doors in Buckinghamshire fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Buckinghamshire above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
The steps on a Buckinghamshire installation
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Budgeting for fire door hold-open devices in Buckinghamshire
Budget around £180–£450 per door for the device, excluding fire alarm interface work, ex VAT for fire door hold-open devices. Our guide prices are the same in Buckinghamshire as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Fire door hold-open devices questions
Do you provide fire door hold-open devices across Buckinghamshire?
Yes. We cover all of Buckinghamshire, including Milton Keynes and High Wycombe. Surveys and written quotes are free.
What is the difference between a hold-open and a free-swing closer?
A hold-open keeps the door at a fixed open position. A free-swing closer lets the door move freely, as if no closer were fitted, until the alarm sounds.
Who tests hold-open devices?
They should be tested with the fire alarm as part of the routine testing arrangements. We test them at installation and record the results.