Flat entrance fire doors in Shrewsbury, done to the evidence
Looking for flat entrance fire doors in Shrewsbury? We supply and fit certified fire doors and components across Shrewsbury and the wider Shropshire area, working from a free survey and a fixed written quote.
Around Shrewsbury, high-street shops, schools and houses with integral garages all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
In a block of flats in Shrewsbury, each flat's front door is what keeps smoke out of the shared corridor, which is why a working closer matters as much as the door. Flat entrance door programmes in Shrewsbury are scheduled around residents, with access agreed in advance and each flat left secure the same day.
Why flat front doors matter so much
In most blocks the fire strategy relies on each flat containing a fire for long enough that other residents can stay put or leave safely. The flat entrance door is the barrier that makes that work. A door without a working closer, with a missing seal or with a non-fire-rated letterplate can let smoke into the corridor within minutes.
In England, regulation 10 of the Fire Safety (England) Regulations 2022 asks responsible persons in residential buildings above 11 metres to use best endeavours to check flat entrance doors at least every 12 months. Rules differ in Wales, Scotland and Northern Ireland; our guide to the regulations for flats sets them out.
As standard, the work covers:
- Resident liaison, photo record and certificate references
- Viewer, numerals and security hardware within the certification
- Certified FD30S doorset in timber or composite
- Intumescent and smoke seals, threshold set to evidence
Fire door law for Shrewsbury properties
In Shrewsbury, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Shrewsbury building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Where flat entrance fire doors fit in Shrewsbury
Typical settings for flat entrance fire doors include flats above shops, sheltered housing and purpose-built blocks of flats. In Shrewsbury, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
The steps on a Shrewsbury installation
- Survey each flat door and agree access with residents
- Confirm specification, finish and hardware with the client
- Order certified doorsets made to measure
- Remove the old door and frame with minimal disruption
- Install, seal, adjust and test the new doorset
- Hand over evidence and resident guidance
Prices for flat entrance fire doors in Shrewsbury
Budget around £1,200–£2,400 per certified flat entrance doorset supplied and fitted, ex VAT for flat entrance fire doors. Our guide prices are the same in Shrewsbury as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Around Shrewsbury
Nearby towns we cover include Wellington, Telford and Rhosllannerchrugog. Distance from Shrewsbury does not change our guide prices, and the survey and quote are free.
Common questions
Is Shrewsbury within your coverage area?
It is. We cover Shrewsbury in Shropshire and neighbouring towns such as Wellington. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can residents choose the colour of their front door?
Often, within the range the doorset manufacturer offers and within any rules the freeholder sets for the corridor. Factory finishes are better than site painting, which can clog seals and hide labels.
How long does a flat door replacement take?
Typically half a day per door, with the flat secure at the end of the visit. We agree access times with residents in advance and keep the corridor clear while we work.