Getting fire door hold-open devices right in Shrewsbury
Our fire door hold-open devices service covers Shrewsbury and the wider Shropshire area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Fire doors in Shrewsbury protect escape routes in family homes after loft conversions, schools and low-rise blocks of flats alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Free-swing closers suit Shrewsbury settings where residents or pupils find doors hard to open. Where doors in Shrewsbury care homes, schools or offices are being wedged open, a hold-open device is the safe fix.
Types of hold-open
Electromagnetic door holders are wall or floor magnets wired to the fire alarm. Hold-open closers combine the closer and the hold-open in one unit. Free-swing closers let the door move freely and close it on alarm. Some battery units listen for the alarm sound; these must be suitable for the alarm system and the building. The right choice depends on the door, the alarm and how people use the space.
What you get:
- Assessment of door use and alarm system
- Coordination of alarm interface
- Hold-open and free-swing closers
- Release testing with the alarm
The regulations behind fire doors in Shrewsbury
The rules that apply to fire doors in Shrewsbury are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Shrewsbury block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Shrewsbury
Typical settings for fire door hold-open devices include care homes, communal corridors and clinics. In Shrewsbury, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
The steps on a Shrewsbury installation
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
What does fire door hold-open devices cost in Shrewsbury?
Budget around £180–£450 per door for the device, excluding fire alarm interface work, ex VAT for fire door hold-open devices. Our guide prices are the same in Shrewsbury as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Shrewsbury and neighbouring towns
We also cover towns near Shrewsbury, including Wellington (15.9 km away), Telford and Rhosllannerchrugog. If your building is in SY1 or a neighbouring district, the service and pricing are the same.
Questions
Do you cover SY1 and nearby postcodes?
Yes. We cover Shrewsbury including SY1, and nearby towns such as Wellington and Telford. The survey and written quote are free.
What happens on a survey in Shrewsbury?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
What is the difference between a hold-open and a free-swing closer?
A hold-open keeps the door at a fixed open position. A free-swing closer lets the door move freely, as if no closer were fitted, until the alarm sounds.
Is it legal to wedge open a fire door?
Wedging a fire door open defeats its purpose and is likely to breach the duties under fire safety law. A hold-open device that releases on alarm is the safe alternative.