Certified fire doorsets in Surrey: what's involved
Our certified fire doorsets service runs throughout Surrey. Main towns include Woking, Guildford and Esher, and we cover the smaller places in between.
Every doorset we fit in Surrey is handed over with its certificate reference and photographs of the frame fixing and gap sealing. Doorsets suit refurbishment programmes in Surrey, where several openings can be measured, ordered and fitted in one planned sequence.
Surrey has a mix of buildings, from purpose-built blocks to converted houses and commercial premises. We tailor the programme to the building, not the other way round.
Why choose a doorset over a door leaf?
A fire door's rating belongs to the assembly that was tested, not to the leaf on its own. When a certified leaf is hung in an old frame with mismatched hinges and seals, nobody can say with confidence how it will perform. A doorset arrives with the frame, gaps and ironmongery already matched, so the installer's job is to fix it correctly into the opening and seal it to the structure.
Doorsets also cut time on site, which matters in occupied buildings: less cutting, less dust and fewer return visits.
Fire door law for Surrey properties
Fire doors in Surrey fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Surrey above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
How a Surrey job runs
- Survey and measure every structural opening
- Specify doorsets by rating, size, hand, finish and hardware
- Prepare openings and remove existing doors and linings
- Fix and seal the frames to the structure
- Hang, adjust and test each leaf and closer
- Fit architraves, make good and hand over evidence
What does certified fire doorsets cost in Surrey?
As a guide, budget £650–£1,300 for an FD30 doorset and £850–£1,800 for FD60, supplied and fitted, ex VAT for certified fire doorsets. The figure for your Surrey building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Questions
Do you provide certified fire doorsets across Surrey?
Yes. We cover all of Surrey, including Woking and Guildford. Surveys and written quotes are free.
Are doorsets more expensive than a leaf?
The product costs more, but the labour is often lower and the result is better evidenced. Where a frame would need replacing anyway, a doorset is usually the better value.
Do doorsets come painted?
They can be supplied primed, factory painted, veneered, laminated or with a composite skin, depending on the product. Factory finishes avoid painting over seals and labels on site.