What certified fire doorsets in Oxfordshire should include
Whether your building is in Oxford, Banbury or a smaller place in Oxfordshire, we can provide certified fire doorsets with the same evidence-led approach.
Pre-hung doorsets keep disruption down in occupied buildings in Oxfordshire, with less cutting and fewer return visits. Doorsets suit refurbishment programmes in Oxfordshire, where several openings can be measured, ordered and fitted in one planned sequence.
Wherever your building is in Oxfordshire, the fire safety duties come from national rules, and our installation standard is the same.
How is a doorset installed?
The opening is prepared to the size and tolerances in the manufacturer's instructions. The frame is fixed with the specified fixings at the specified centres, packed where needed, and checked for square, plumb and twist. The gap between frame and wall is then sealed with a material covered by the evidence, which BS 8214:2026 now describes in more detail. Finally the leaf is adjusted, the closer is set and the assembly is tested before the architraves go on.
Fire door law for Oxfordshire properties
The rules that apply to fire doors in Oxfordshire are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Oxfordshire block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
What happens after you enquire
- Survey and measure every structural opening
- Specify doorsets by rating, size, hand, finish and hardware
- Prepare openings and remove existing doors and linings
- Fix and seal the frames to the structure
- Hang, adjust and test each leaf and closer
- Fit architraves, make good and hand over evidence
What does certified fire doorsets cost in Oxfordshire?
Budget around £650–£1,300 for an FD30 doorset and £850–£1,800 for FD60, supplied and fitted, ex VAT for certified fire doorsets. Our guide prices are the same in Oxfordshire as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Questions
Do you provide certified fire doorsets across Oxfordshire?
Yes. We cover all of Oxfordshire, including Oxford and Banbury. Surveys and written quotes are free.
How long do doorsets take to arrive?
Lead times depend on the manufacturer, size, finish and ironmongery. Standard sizes can be quick; bespoke sizes and finishes take longer. We give you the lead time with the quote and confirm it at order.
Do doorsets come painted?
They can be supplied primed, factory painted, veneered, laminated or with a composite skin, depending on the product. Factory finishes avoid painting over seals and labels on site.