Fire door frames for Airdrie buildings
Our fire door frames service covers Airdrie and the wider Lanarkshire area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Buildings in and around Airdrie range from care homes to family homes after loft conversions and schools. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Airdrie survey. Frame-to-wall gaps on Airdrie jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
Each installation includes:
- Hardwood or certified frames to suit the door
- Photographs of fixing and sealing before covering
- Architraves and making good
- Frame-to-wall gap sealing with evidenced materials
Which fire door rules apply in Airdrie?
Airdrie is in Scotland, which has its own system. Building work, including many fire door replacements, is governed by the Building (Scotland) Regulations 2004 and the Technical Handbooks, with Section 2 covering fire; where a building warrant is needed it comes from the local authority. In non-domestic premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 set the duties.
The common parts of private blocks of flats largely sit outside Part 3 of the 2005 Act, so the fire risk assessment and housing obligations usually drive fire door work in residential buildings in Airdrie.
Which buildings in Airdrie need fire door frames?
Typical settings for fire door frames include older blocks of flats, schools and offices. In Airdrie, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
Our process in Airdrie
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
What does fire door frames cost in Airdrie?
Guide pricing for fire door frames: £250–£600 per frame replaced, fixed and sealed, ex VAT. Volume work across several doors in one Airdrie building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Covering Airdrie and nearby
We also cover towns near Airdrie, including Coatbridge (2.8 km away), Motherwell and Cumbernauld. If your building is in ML6 or a neighbouring district, the service and pricing are the same.
Questions
Do you work in Airdrie?
Yes, we take on fire door frames in Airdrie and the surrounding area, including Coatbridge and Motherwell. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Airdrie building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
What is the frame-to-wall gap?
It is the space between the door frame and the surrounding wall, normally hidden by the architrave. If it is not filled with a suitable fire-resisting material, fire and smoke can pass around the door.
Can I use expanding foam around a fire door frame?
Only a fire-rated foam with evidence for that use and gap size. Ordinary expanding foam is not suitable.