Certified fire doorsets in Basingstoke, done to the evidence
Our certified fire doorsets service in Basingstoke is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Around Basingstoke, HMOs, care homes and converted period houses all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Every doorset we fit in Basingstoke is handed over with its certificate reference and photographs of the frame fixing and gap sealing. Doorsets suit refurbishment programmes in Basingstoke, where several openings can be measured, ordered and fitted in one planned sequence.
What does third-party certification mean?
Third-party certification means an independent body has checked the product's test evidence and audits the factory that makes it. Certified products carry a label or plug on the door edge and a certificate you can check. Buyers often look for schemes such as BWF Certifire or BM TRADA Q-Mark when choosing products. Our guide to certified doorsets explains how to read the label and certificate.
As standard, the work covers:
- Doorset selection to rating, size and use
- Closer set-up and close-and-latch testing
- Pre-hung, pre-machined doorsets where available
- Installation to the manufacturer's instructions
Which fire door rules apply in Basingstoke?
Fire doors in Basingstoke fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Basingstoke above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Where certified fire doorsets fit in Basingstoke
Typical settings for certified fire doorsets include new-build and conversion projects, blocks of flats and schools and offices. In Basingstoke, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
How a Basingstoke job runs
- Survey and measure every structural opening
- Specify doorsets by rating, size, hand, finish and hardware
- Prepare openings and remove existing doors and linings
- Fix and seal the frames to the structure
- Hang, adjust and test each leaf and closer
- Fit architraves, make good and hand over evidence
Guide prices in Basingstoke
Guide pricing for certified fire doorsets: £650–£1,300 for an FD30 doorset and £850–£1,800 for FD60, supplied and fitted, ex VAT. Volume work across several doors in one Basingstoke building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Basingstoke
Basingstoke is about 45.6 km from Southampton, and we cover both, along with nearby Fleet and Thatcham. Send us your postcode and we'll confirm survey dates.
Questions
Do you cover RG21 and nearby postcodes?
Yes. We cover Basingstoke including RG21, and nearby towns such as Fleet and Thatcham. The survey and written quote are free.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Are doorsets more expensive than a leaf?
The product costs more, but the labour is often lower and the result is better evidenced. Where a frame would need replacing anyway, a doorset is usually the better value.
Do doorsets come painted?
They can be supplied primed, factory painted, veneered, laminated or with a composite skin, depending on the product. Factory finishes avoid painting over seals and labels on site.