Certified fire doorsets in London

What certified fire doorsets in London should include

Our certified fire doorsets service covers London and the wider Greater London area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.

Buildings in and around London range from mixed-use office buildings to restaurants and schools. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

Every doorset we fit in London is handed over with its certificate reference and photographs of the frame fixing and gap sealing. Doorsets suit refurbishment programmes in London, where several openings can be measured, ordered and fitted in one planned sequence.

Why choose a doorset over a door leaf?

A fire door's rating belongs to the assembly that was tested, not to the leaf on its own. When a certified leaf is hung in an old frame with mismatched hinges and seals, nobody can say with confidence how it will perform. A doorset arrives with the frame, gaps and ironmongery already matched, so the installer's job is to fix it correctly into the opening and seal it to the structure.

Doorsets also cut time on site, which matters in occupied buildings: less cutting, less dust and fewer return visits.

As standard, the work covers:

• Frame fixing and frame-to-wall gap sealing
• Closer set-up and close-and-latch testing
• Installation to the manufacturer's instructions
• Doorset selection to rating, size and use

Rules and responsibilities in London

In London, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet. Enforcement of fire safety law in London sits with the London Fire Brigade.

Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your London building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.

Buildings and duty holders in London

From blocks of flats to new-build and conversion projects, the requirement for certified fire doorsets in London comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

The steps on a London installation

1. Survey and measure every structural opening
2. Specify doorsets by rating, size, hand, finish and hardware
3. Prepare openings and remove existing doors and linings
4. Fix and seal the frames to the structure
5. Hang, adjust and test each leaf and closer
6. Fit architraves, make good and hand over evidence

Guide prices in London

Guide pricing for certified fire doorsets: £650–£1,300 for an FD30 doorset and £850–£1,800 for FD60, supplied and fitted, ex VAT. Volume work across several doors in one London building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Nearby areas we cover from London

As well as London, we cover neighbouring towns including City of Westminster, Pimlico and Islington. The survey and quote are free.

Questions