Certified fire doorsets for Catford buildings
Our certified fire doorsets service covers Catford and the wider Greater London area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Buildings in and around Catford range from converted flats to shared houses and restaurants. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Pre-hung doorsets keep disruption down in occupied buildings in Catford, with less cutting and fewer return visits. Every doorset we fit in Catford is handed over with its certificate reference and photographs of the frame fixing and gap sealing.
How is a doorset installed?
The opening is prepared to the size and tolerances in the manufacturer's instructions. The frame is fixed with the specified fixings at the specified centres, packed where needed, and checked for square, plumb and twist. The gap between frame and wall is then sealed with a material covered by the evidence, which BS 8214:2026 now describes in more detail. Finally the leaf is adjusted, the closer is set and the assembly is tested before the architraves go on.
As standard, the work covers:
- Pre-hung, pre-machined doorsets where available
- Frame fixing and frame-to-wall gap sealing
- Installation to the manufacturer's instructions
- Doorset selection to rating, size and use
The regulations behind fire doors in Catford
England's framework applies in Catford. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors. In London, the London Fire Brigade is the enforcing authority for fire safety law.
For blocks over 11 metres in Catford, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Where certified fire doorsets fit in Catford
Landlords, managing agents, facilities teams and homeowners in Catford can all commission certified fire doorsets from us. The usual settings are new-build and conversion projects and blocks of flats, though single doors for schools and offices are just as welcome.
The steps on a Catford installation
- Survey and measure every structural opening
- Specify doorsets by rating, size, hand, finish and hardware
- Prepare openings and remove existing doors and linings
- Fix and seal the frames to the structure
- Hang, adjust and test each leaf and closer
- Fit architraves, make good and hand over evidence
Guide prices in Catford
As a guide, budget £650–£1,300 for an FD30 doorset and £850–£1,800 for FD60, supplied and fitted, ex VAT for certified fire doorsets. The figure for your Catford building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Catford and neighbouring towns
Neighbouring towns such as Blackheath, Greenwich, Beckenham and Peckham are covered too, so clients with several buildings can use one installer and one evidence format.
Questions from Catford
Is Catford within your coverage area?
It is. We cover Catford in Greater London and neighbouring towns such as Blackheath. There is no charge for the survey.
What happens on a survey in Catford?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Are doorsets more expensive than a leaf?
The product costs more, but the labour is often lower and the result is better evidenced. Where a frame would need replacing anyway, a doorset is usually the better value.
Do doorsets come painted?
They can be supplied primed, factory painted, veneered, laminated or with a composite skin, depending on the product. Factory finishes avoid painting over seals and labels on site.