Certified fire doorsets in Battersea

Certified fire doorsets: our service in Battersea

We provide certified fire doorsets in Battersea (SW11 and the surrounding postcodes), from the first survey through to a documented handover.

Fire doors in Battersea protect escape routes in shared houses, mixed-use office buildings and student accommodation alike. We adapt the programme to the building and its occupants, never the standard of the installation.

Doorsets suit refurbishment programmes in Battersea, where several openings can be measured, ordered and fitted in one planned sequence. Every doorset we fit in Battersea is handed over with its certificate reference and photographs of the frame fixing and gap sealing.

What does third-party certification mean?

Third-party certification means an independent body has checked the product's test evidence and audits the factory that makes it. Certified products carry a label or plug on the door edge and a certificate you can check. Buyers often look for schemes such as BWF Certifire or BM TRADA Q-Mark when choosing products. Our guide to certified doorsets explains how to read the label and certificate.

Each installation includes:

• Certificate references and photo record per opening
• Doorset selection to rating, size and use
• Closer set-up and close-and-latch testing
• Installation to the manufacturer's instructions

What the rules say for Battersea

Fire doors in Battersea fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained. In London, the London Fire Brigade is the enforcing authority for fire safety law.

For residential buildings in Battersea above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Where certified fire doorsets fit in Battersea

The need for certified fire doorsets usually arises in blocks of flats or new-build and conversion projects, and sometimes refurbishment programmes. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Battersea to keep escape routes protected throughout.

How a Battersea job runs

1. Survey and measure every structural opening
2. Specify doorsets by rating, size, hand, finish and hardware
3. Prepare openings and remove existing doors and linings
4. Fix and seal the frames to the structure
5. Hang, adjust and test each leaf and closer
6. Fit architraves, make good and hand over evidence

What does certified fire doorsets cost in Battersea?

As a guide, budget £650–£1,300 for an FD30 doorset and £850–£1,800 for FD60, supplied and fitted, ex VAT for certified fire doorsets. The figure for your Battersea building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Battersea and neighbouring towns

We also cover towns near Battersea, including Chelsea (1.7 km away), Pimlico and City of Westminster. If your building is in SW11 or a neighbouring district, the service and pricing are the same.

Questions