Getting certified fire doorsets right in Dunbartonshire
For certified fire doorsets anywhere in Dunbartonshire, one team handles the survey, supply, installation and handover, covering Bearsden, Clydebank, Vale of Leven and the rest of the county.
Pre-hung doorsets keep disruption down in occupied buildings in Dunbartonshire, with less cutting and fewer return visits. Doorsets suit refurbishment programmes in Dunbartonshire, where several openings can be measured, ordered and fitted in one planned sequence.
Wherever your building is in Dunbartonshire, the fire safety duties come from national rules, and our installation standard is the same.
How is a doorset installed?
The opening is prepared to the size and tolerances in the manufacturer's instructions. The frame is fixed with the specified fixings at the specified centres, packed where needed, and checked for square, plumb and twist. The gap between frame and wall is then sealed with a material covered by the evidence, which BS 8214:2026 now describes in more detail. Finally the leaf is adjusted, the closer is set and the assembly is tested before the architraves go on.
Fire door law for Dunbartonshire properties
In Dunbartonshire, fire doors are specified against Scotland's Technical Handbooks (Section 2: Fire) under the Building (Scotland) Regulations 2004, rather than Approved Document B. Duties in non-domestic premises come from the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006.
England's regulation 10 does not apply in Scotland. We follow the building's fire risk assessment and, where building work needs a warrant, the local authority's requirements.
The steps on a Dunbartonshire installation
- Survey and measure every structural opening
- Specify doorsets by rating, size, hand, finish and hardware
- Prepare openings and remove existing doors and linings
- Fix and seal the frames to the structure
- Hang, adjust and test each leaf and closer
- Fit architraves, make good and hand over evidence
What does certified fire doorsets cost in Dunbartonshire?
Guide pricing for certified fire doorsets: £650–£1,300 for an FD30 doorset and £850–£1,800 for FD60, supplied and fitted, ex VAT. Volume work across several doors in one Dunbartonshire building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Questions
Do you provide certified fire doorsets across Dunbartonshire?
Yes. We cover all of Dunbartonshire, including Bearsden and Clydebank. Surveys and written quotes are free.
Can a doorset be fitted into an existing opening?
Usually, yes. Doorsets are made to fit the structural opening once the old frame is removed. We measure the opening on the survey so the doorset is made to the right size and the gaps to the wall stay within what the evidence allows.
Are doorsets more expensive than a leaf?
The product costs more, but the labour is often lower and the result is better evidenced. Where a frame would need replacing anyway, a doorset is usually the better value.