Getting fire door hold-open devices right in Exmouth
Our fire door hold-open devices service in Exmouth is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Buildings in and around Exmouth range from small blocks of flats to light industrial buildings and care homes. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Where doors in Exmouth care homes, schools or offices are being wedged open, a hold-open device is the safe fix. We coordinate with your fire alarm contractor in Exmouth so every hold-open releases when it should.
Working with your alarm contractor
Hard-wired hold-opens need an interface with the fire alarm, which is usually designed and certified by your fire alarm contractor. We fit and commission the door side and coordinate the interface, then test that every device releases when the alarm operates.
What you get:
- Hold-open and free-swing closers
- Assessment of door use and alarm system
- Release testing with the alarm
- Record of devices and test results
What the rules say for Exmouth
In Exmouth, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Exmouth building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Buildings and duty holders in Exmouth
The need for fire door hold-open devices usually arises in offices or communal corridors, and sometimes clinics. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Exmouth to keep escape routes protected throughout.
The steps on a Exmouth installation
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
What does fire door hold-open devices cost in Exmouth?
If you need a budget figure first, the guide for fire door hold-open devices is £180–£450 per door for the device, excluding fire alarm interface work, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Exmouth
Nearby towns we cover include Heavitree, Exeter and Newton Abbot. Distance from Exmouth does not change our guide prices, and the survey and quote are free.
Questions
Is Exmouth within your coverage area?
It is. We cover Exmouth in Devon and neighbouring towns such as Heavitree. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Who tests hold-open devices?
They should be tested with the fire alarm as part of the routine testing arrangements. We test them at installation and record the results.
Do hold-open devices need the fire alarm?
Hard-wired devices are released by the fire alarm system. Some battery units detect the alarm sound instead; they must be suitable for the building and its alarm.