Fire door ironmongery in West Midlands: what's involved
Whether your building is in Birmingham, Coventry or a smaller place in West Midlands, we can provide fire door ironmongery with the same evidence-led approach.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in West Midlands we replace them with hardware covered by each door's evidence. We supply ironmongery for West Midlands fire doors that matches each door's test evidence.
West Midlands has a mix of buildings, from purpose-built blocks to converted houses and commercial premises. We tailor the programme to the building, not the other way round.
Why hardware choice matters
Fire doors are tested with particular hardware. Hinges hold the door in place as it heats up; locks and latches keep it shut against fire pressure; their holes are protected with intumescent linings. Swapping in a cheaper hinge, a larger lock body or a lever on a spindle that melts can change how the door behaves. Hinges for fire doors are commonly grade 13 to BS EN 1935.
Which fire door rules apply in West Midlands?
Fire doors in West Midlands fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in West Midlands above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
What happens after you enquire
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
What does fire door ironmongery cost in West Midlands?
Guide pricing for fire door ironmongery: from £40 for minor items to £350 for a full hardware set per door, ex VAT. Volume work across several doors in one West Midlands building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Common questions
Do you provide fire door ironmongery across West Midlands?
Yes. We cover all of West Midlands, including Birmingham and Coventry. Surveys and written quotes are free.
Are brass hinges acceptable on fire doors?
Only if they are fire tested and covered by the door's evidence. Many decorative hinges are not.
How many hinges does a fire door need?
Usually at least three, of the type and grade specified in the door's evidence. Heavier or taller doors may need more.