Getting fire door ironmongery right in Stafford
Looking for fire door ironmongery in Stafford? We supply and fit certified fire doors and components across Stafford and the wider Staffordshire area, working from a free survey and a fixed written quote.
Around Stafford, houses with integral garages, industrial estates and high-street shops all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Signage for fire doors in Stafford buildings is fitted as part of the job, not as an afterthought. Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Stafford we replace them with hardware covered by each door's evidence.
Signage
Most fire doors need a sign saying whether they should be kept shut, kept locked or are automatic. We fit signage appropriate to the door's use as part of the installation.
On a typical job that means:
- Lever handles, pull handles and push plates
- Fire door signage
- Fire-rated hinges, commonly grade 13
- Bolts and selectors where specified
The regulations behind fire doors in Stafford
The rules that apply to fire doors in Stafford are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Stafford block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Which buildings in Stafford need fire door ironmongery?
You are most likely to need fire door ironmongery if you look after HMOs, offices or hotels. Whatever the building in Stafford, we survey each opening and tell you which doors need work and which do not.
Our process in Stafford
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Budgeting for fire door ironmongery in Stafford
As a guide, budget from £40 for minor items to £350 for a full hardware set per door, ex VAT for fire door ironmongery. The figure for your Stafford building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Covering Stafford and nearby
We also cover towns near Stafford, including Rugeley (13.1 km away), Cannock and Burntwood. If your building is in ST16 or a neighbouring district, the service and pricing are the same.
Questions
Is Stafford within your coverage area?
It is. We cover Stafford in Staffordshire and neighbouring towns such as Rugeley. There is no charge for the survey.
What happens on a survey in Stafford?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can I fit a new lock to a fire door?
Only one that is covered by the door's test evidence, fitted with the correct intumescent protection. A larger lock body or new holes can compromise the door.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.