Fire door ironmongery in Whitstable, done to the evidence
When you book fire door ironmongery in Whitstable, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Around Whitstable, care homes, family homes after loft conversions and houses with integral garages all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
We supply ironmongery for Whitstable fire doors that matches each door's test evidence. Signage for fire doors in Whitstable buildings is fitted as part of the job, not as an afterthought.
Why hardware choice matters
Fire doors are tested with particular hardware. Hinges hold the door in place as it heats up; locks and latches keep it shut against fire pressure; their holes are protected with intumescent linings. Swapping in a cheaper hinge, a larger lock body or a lever on a spindle that melts can change how the door behaves. Hinges for fire doors are commonly grade 13 to BS EN 1935.
As standard, the work covers:
- Locks and latches covered by the evidence
- Bolts and selectors where specified
- Intumescent pads and lock linings
- Lever handles, pull handles and push plates
The regulations behind fire doors in Whitstable
Fire doors in Whitstable fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Whitstable above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Where fire door ironmongery fit in Whitstable
From blocks of flats to hotels, the requirement for fire door ironmongery in Whitstable comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
How a Whitstable job runs
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Budgeting for fire door ironmongery in Whitstable
If you need a budget figure first, the guide for fire door ironmongery is from £40 for minor items to £350 for a full hardware set per door, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Whitstable and neighbouring towns
Neighbouring towns such as Herne Bay, Canterbury, Faversham and Sittingbourne are covered too, so clients with several buildings can use one installer and one evidence format.
Questions from Whitstable
Do you cover CT5 and nearby postcodes?
Yes. We cover Whitstable including CT5, and nearby towns such as Herne Bay and Canterbury. The survey and written quote are free.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can I fit a new lock to a fire door?
Only one that is covered by the door's test evidence, fitted with the correct intumescent protection. A larger lock body or new holes can compromise the door.
How many hinges does a fire door need?
Usually at least three, of the type and grade specified in the door's evidence. Heavier or taller doors may need more.