Fire door ironmongery in Oldham: what's involved
Our fire door ironmongery service covers Oldham and the wider Greater Manchester area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Fire doors in Oldham protect escape routes in care homes, student accommodation and purpose-built blocks of flats alike. We adapt the programme to the building and its occupants, never the standard of the installation.
We supply ironmongery for Oldham fire doors that matches each door's test evidence. Signage for fire doors in Oldham buildings is fitted as part of the job, not as an afterthought.
Why hardware choice matters
Fire doors are tested with particular hardware. Hinges hold the door in place as it heats up; locks and latches keep it shut against fire pressure; their holes are protected with intumescent linings. Swapping in a cheaper hinge, a larger lock body or a lever on a spindle that melts can change how the door behaves. Hinges for fire doors are commonly grade 13 to BS EN 1935.
As standard, the work covers:
- Fire door signage
- Intumescent pads and lock linings
- Fire-rated hinges, commonly grade 13
- Bolts and selectors where specified
What the rules say for Oldham
England's framework applies in Oldham. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Oldham, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Who needs fire door ironmongery in Oldham?
Typical settings for fire door ironmongery include offices, HMOs and hotels. In Oldham, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
How a Oldham job runs
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Budgeting for fire door ironmongery in Oldham
Guide pricing for fire door ironmongery: from £40 for minor items to £350 for a full hardware set per door, ex VAT. Volume work across several doors in one Oldham building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Oldham
We also cover towns near Oldham, including Chadderton (1.5 km away), Royton and Failsworth. If your building is in OL1 or a neighbouring district, the service and pricing are the same.
Common questions
Do you work in Oldham?
Yes, we take on fire door ironmongery in Oldham and the surrounding area, including Chadderton and Royton. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Oldham building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can I fit a new lock to a fire door?
Only one that is covered by the door's test evidence, fitted with the correct intumescent protection. A larger lock body or new holes can compromise the door.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.