Fire door frames in Pontefract, done to the evidence
If you need fire door frames in Pontefract, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Pontefract has a broad mix of buildings, including family homes after loft conversions, small offices and houses with integral garages, and the same fire door principles apply to all of them.
Frame-to-wall gaps on Pontefract jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out. In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Pontefract survey.
BS 8214:2026 and the frame-to-wall gap
The 2026 revision of BS 8214 strengthened its guidance on sealing the gap between the frame and the surrounding structure, listing material types such as stone wool, mastic and fire-rated foam, and putting the emphasis on using what the evidence supports. We fill and seal that gap with materials covered by the doorset's or sealant's test evidence and photograph it before the architraves go back on.
What you get:
- Frame-to-wall gap sealing with evidenced materials
- Architraves and making good
- Assessment of frame condition and compatibility
- Photographs of fixing and sealing before covering
What the rules say for Pontefract
England's framework applies in Pontefract. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Pontefract, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Buildings and duty holders in Pontefract
Typical settings for fire door frames include offices, schools and older blocks of flats. In Pontefract, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
The steps on a Pontefract installation
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Prices for fire door frames in Pontefract
If you need a budget figure first, the guide for fire door frames is £250–£600 per frame replaced, fixed and sealed, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Pontefract and neighbouring towns
Neighbouring towns such as Castleford, Wakefield, Lofthouse and Ossett are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Is Pontefract within your coverage area?
It is. We cover Pontefract in West Yorkshire and neighbouring towns such as Castleford. There is no charge for the survey.
How quickly can you survey in Pontefract?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Can I use expanding foam around a fire door frame?
Only a fire-rated foam with evidence for that use and gap size. Ordinary expanding foam is not suitable.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.