What fire door frames in Redhill should include
Our fire door frames service in Redhill is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Redhill has a broad mix of buildings, including low-rise blocks of flats, high-street shops and HMOs, and the same fire door principles apply to all of them.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Redhill survey. Frame-to-wall gaps on Redhill jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
Frames on their own
Where a leaf is sound but the frame is not, a new compatible frame can sometimes be fitted to the existing leaf, provided the combination is supported by the leaf's certification. More often, a frame replacement is part of a doorset installation.
Each installation includes:
- Architraves and making good
- Assessment of frame condition and compatibility
- Fixing at specified centres with packing
- Frame-to-wall gap sealing with evidenced materials
What the rules say for Redhill
The rules that apply to fire doors in Redhill are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Redhill block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Which buildings in Redhill need fire door frames?
Landlords, managing agents, facilities teams and homeowners in Redhill can all commission fire door frames from us. The usual settings are converted houses and older blocks of flats, though single doors for schools are just as welcome.
How a Redhill job runs
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Budgeting for fire door frames in Redhill
As a guide, budget £250–£600 per frame replaced, fixed and sealed, ex VAT for fire door frames. The figure for your Redhill building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Around Redhill
Neighbouring towns such as Reigate, Horley, Caterham and Coulsdon are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Is Redhill within your coverage area?
It is. We cover Redhill in Surrey and neighbouring towns such as Reigate. There is no charge for the survey.
Can you work from an existing inspection report for my Redhill building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can I use expanding foam around a fire door frame?
Only a fire-rated foam with evidence for that use and gap size. Ordinary expanding foam is not suitable.
What is the frame-to-wall gap?
It is the space between the door frame and the surrounding wall, normally hidden by the architrave. If it is not filled with a suitable fire-resisting material, fire and smoke can pass around the door.