What fire door frames in Ashford (Surrey) should include
Looking for fire door frames in Ashford (Surrey)? We supply and fit certified fire doors and components across Ashford (Surrey) and the wider Surrey area, working from a free survey and a fixed written quote.
Around Ashford (Surrey), care homes, light industrial buildings and family homes after loft conversions all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Ashford (Surrey) survey. Frame-to-wall gaps on Ashford (Surrey) jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
Frames on their own
Where a leaf is sound but the frame is not, a new compatible frame can sometimes be fitted to the existing leaf, provided the combination is supported by the leaf's certification. More often, a frame replacement is part of a doorset installation.
Each installation includes:
- Fixing at specified centres with packing
- Photographs of fixing and sealing before covering
- Architraves and making good
- Assessment of frame condition and compatibility
The regulations behind fire doors in Ashford (Surrey)
The rules that apply to fire doors in Ashford (Surrey) are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Ashford (Surrey) block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Which buildings in Ashford (Surrey) need fire door frames?
The need for fire door frames usually arises in converted houses or older blocks of flats, and sometimes schools. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Ashford (Surrey) to keep escape routes protected throughout.
Our process in Ashford (Surrey)
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Budgeting for fire door frames in Ashford (Surrey)
Guide pricing for fire door frames: £250–£600 per frame replaced, fixed and sealed, ex VAT. Volume work across several doors in one Ashford (Surrey) building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Ashford (Surrey) and neighbouring towns
Ashford (Surrey) is about 14.4 km from Woking, and we cover both, along with nearby Staines and Feltham. Send us your postcode and we'll confirm survey dates.
Common questions
Do you work in Ashford (Surrey)?
Yes, we take on fire door frames in Ashford (Surrey) and the surrounding area, including Staines and Feltham. Send your postcode and a few details and we'll come back with survey dates.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can I use expanding foam around a fire door frame?
Only a fire-rated foam with evidence for that use and gap size. Ordinary expanding foam is not suitable.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.