Fire door frames in Corby: what's involved
We provide fire door frames in Corby (NN17 and the surrounding postcodes), from the first survey through to a documented handover.
Buildings in and around Corby range from family homes after loft conversions to care homes and low-rise blocks of flats. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Corby survey. Frame-to-wall gaps on Corby jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
On a typical job that means:
- Fixing at specified centres with packing
- Architraves and making good
- Assessment of frame condition and compatibility
- Hardwood or certified frames to suit the door
What the rules say for Corby
Fire doors in Corby fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Corby above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Who needs fire door frames in Corby?
Landlords, managing agents, facilities teams and homeowners in Corby can all commission fire door frames from us. The usual settings are offices and converted houses, though single doors for schools are just as welcome.
How a Corby job runs
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Prices for fire door frames in Corby
Budget around £250–£600 per frame replaced, fixed and sealed, ex VAT for fire door frames. Our guide prices are the same in Corby as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Nearby areas we cover from Corby
We also cover towns near Corby, including Kettering (11.2 km away), Market Harborough and Wellingborough. If your building is in NN17 or a neighbouring district, the service and pricing are the same.
Questions from Corby
Do you work in Corby?
Yes, we take on fire door frames in Corby and the surrounding area, including Kettering and Market Harborough. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Corby?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.
Can I use expanding foam around a fire door frame?
Only a fire-rated foam with evidence for that use and gap size. Ordinary expanding foam is not suitable.