FD60 fire doors in Corby, NN17

FD60 fire doors in Corby: what's involved

We provide FD60 fire doors in Corby (NN17 and the surrounding postcodes), from the first survey through to a documented handover.

Corby has a broad mix of buildings, including schools, industrial estates and houses with integral garages, and the same fire door principles apply to all of them.

FD60 openings in Corby buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Corby we generally fit certified doorsets, so frame and leaf share the same test evidence.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

What you get:

• Frame fixing and structural gap sealing recorded with photos
• Certified FD60 doorset or leaf with matching evidence
• Intumescent and smoke seals as specified
• 60-minute glazing systems where vision panels are needed

The regulations behind fire doors in Corby

The rules that apply to fire doors in Corby are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.

Where a Corby block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Where FD60 fire doors fit in Corby

Typical settings for FD60 fire doors include plant and boiler rooms, stair cores in taller blocks and refuse stores. In Corby, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

From enquiry to handover in Corby

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Corby?

Guide pricing for FD60 fire doors: £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. Volume work across several doors in one Corby building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Covering Corby and nearby

We also cover towns near Corby, including Kettering (11.2 km away), Market Harborough and Wellingborough. If your building is in NN17 or a neighbouring district, the service and pricing are the same.

Common questions