Fire door frames in Rushden: what's involved
Looking for fire door frames in Rushden? We supply and fit certified fire doors and components across Rushden and the wider Northamptonshire area, working from a free survey and a fixed written quote.
Rushden has a broad mix of buildings, including light industrial buildings, small blocks of flats and care homes, and the same fire door principles apply to all of them.
We photograph every frame we fix in Rushden before the architraves go on, so the hidden work is on record. Frame-to-wall gaps on Rushden jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
As standard, the work covers:
- Fixing at specified centres with packing
- Assessment of frame condition and compatibility
- Architraves and making good
- Frame-to-wall gap sealing with evidenced materials
Rules and responsibilities in Rushden
The rules that apply to fire doors in Rushden are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Rushden block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Where fire door frames fit in Rushden
From offices to schools, the requirement for fire door frames in Rushden comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
What happens after you enquire
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Budgeting for fire door frames in Rushden
As a guide, budget £250–£600 per frame replaced, fixed and sealed, ex VAT for fire door frames. The figure for your Rushden building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Covering Rushden and nearby
Rushden is about 19.6 km from Northampton, and we cover both, along with nearby Wellingborough and Kettering. Send us your postcode and we'll confirm survey dates.
Questions from Rushden
Do you cover NN10 and nearby postcodes?
Yes. We cover Rushden including NN10, and nearby towns such as Wellingborough and Kettering. The survey and written quote are free.
Can you work from an existing inspection report for my Rushden building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
What is the frame-to-wall gap?
It is the space between the door frame and the surrounding wall, normally hidden by the architrave. If it is not filled with a suitable fire-resisting material, fire and smoke can pass around the door.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.