Fire door frames in Denton, done to the evidence
We provide fire door frames in Denton (M34 and the surrounding postcodes), from the first survey through to a documented handover.
Fire doors in Denton protect escape routes in light industrial buildings, houses with integral garages and small offices alike. We adapt the programme to the building and its occupants, never the standard of the installation.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Denton survey. Frame-to-wall gaps on Denton jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
Frames on their own
Where a leaf is sound but the frame is not, a new compatible frame can sometimes be fitted to the existing leaf, provided the combination is supported by the leaf's certification. More often, a frame replacement is part of a doorset installation.
What you get:
- Photographs of fixing and sealing before covering
- Fixing at specified centres with packing
- Hardwood or certified frames to suit the door
- Assessment of frame condition and compatibility
What the rules say for Denton
England's framework applies in Denton. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Denton, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Which buildings in Denton need fire door frames?
Typical settings for fire door frames include schools, offices and converted houses. In Denton, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
How a Denton job runs
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
What does fire door frames cost in Denton?
Budget around £250–£600 per frame replaced, fixed and sealed, ex VAT for fire door frames. Our guide prices are the same in Denton as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Nearby areas we cover from Denton
Denton is about 8.3 km from Manchester, and we cover both, along with nearby Hyde and Dukinfield. Send us your postcode and we'll confirm survey dates.
Questions from Denton
Do you work in Denton?
Yes, we take on fire door frames in Denton and the surrounding area, including Hyde and Dukinfield. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Denton building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.
What is the frame-to-wall gap?
It is the space between the door frame and the surrounding wall, normally hidden by the architrave. If it is not filled with a suitable fire-resisting material, fire and smoke can pass around the door.