Getting fire door closers right in Bognor Regis
From the PO21 postcode district outwards, we take on fire door closers across Bognor Regis for homes, blocks and workplaces.
Bognor Regis has a broad mix of buildings, including schools, high-street shops and low-rise blocks of flats, and the same fire door principles apply to all of them.
A closer that fails to latch the door is one of the first things we put right on Bognor Regis fire doors. We set closers in Bognor Regis buildings so doors close fully without becoming too heavy to open.
Setting a closer properly
Closers have adjustments for closing speed, latching action and often backcheck. We set them so the door closes from any angle and engages the latch, without slamming. In England, Approved Document M guidance on opening force, no more than 30N for the first 30 degrees and 22.5N from 30 to 60 degrees at the leading edge, is a useful benchmark for usability. Our closers guide has more detail.
On a typical job that means:
- Close-and-latch test from full open
- Assessment of door size, weight and use
- Adjustment of speed, latching and backcheck
- Overhead, concealed or free-swing options
Which fire door rules apply in Bognor Regis?
In Bognor Regis, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Bognor Regis building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Where fire door closers fit in Bognor Regis
You are most likely to need fire door closers if you look after offices, blocks of flats or care homes. Whatever the building in Bognor Regis, we survey each opening and tell you which doors need work and which do not.
The steps on a Bognor Regis installation
- Check the door, frame and existing closer
- Select a closer suited to the leaf and use
- Fit to the template and the door's evidence
- Adjust closing and latching speeds
- Test from wide and small opening angles
- Record the closer and its settings
Budgeting for fire door closers in Bognor Regis
Budget around £90–£220 per closer supplied and fitted; adjustment visits from £195, ex VAT for fire door closers. Our guide prices are the same in Bognor Regis as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Around Bognor Regis
Neighbouring towns such as Chichester, Littlehampton, Worthing and Havant are covered too, so clients with several buildings can use one installer and one evidence format.
Questions
Is Bognor Regis within your coverage area?
It is. We cover Bognor Regis in West Sussex and neighbouring towns such as Chichester. There is no charge for the survey.
What happens on a survey in Bognor Regis?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can a fire door closer be too strong?
Yes. An over-powered or badly set closer makes the door hard to open and may lead people to wedge it. The goal is reliable closing with a reasonable opening force.
What is a free-swing closer?
A closer that lets the door swing freely in normal use and closes it when the fire alarm operates. It suits care settings and people who find doors heavy.