Getting fire door closers right in Romford
If you need fire door closers in Romford, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Around Romford, converted flats, care homes and purpose-built blocks of flats all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
We set closers in Romford buildings so doors close fully without becoming too heavy to open. Free-swing closers are a practical option for Romford care homes and supported living.
The most common fire door fault
A fire door that does not close is not doing its job. Closers fail because they are under-powered, out of adjustment, damaged, leaking or disconnected by people who find the door too heavy. Often the fix is a correctly sized closer, set up properly, rather than a new door.
As standard, the work covers:
- Adjustment of speed, latching and backcheck
- Close-and-latch test from full open
- Correctly powered closer to BS EN 1154
- Overhead, concealed or free-swing options
What the rules say for Romford
The rules that apply to fire doors in Romford are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts. Enforcement of fire safety law in Romford sits with the London Fire Brigade.
Where a Romford block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs fire door closers in Romford?
Landlords, managing agents, facilities teams and homeowners in Romford can all commission fire door closers from us. The usual settings are schools and blocks of flats, though single doors for HMOs are just as welcome.
What happens after you enquire
- Check the door, frame and existing closer
- Select a closer suited to the leaf and use
- Fit to the template and the door's evidence
- Adjust closing and latching speeds
- Test from wide and small opening angles
- Record the closer and its settings
What does fire door closers cost in Romford?
Guide pricing for fire door closers: £90–£220 per closer supplied and fitted; adjustment visits from £195, ex VAT. Volume work across several doors in one Romford building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Romford and neighbouring towns
We also cover towns near Romford, including Hornchurch (2.9 km away), Dagenham and Becontree. If your building is in RM1 or a neighbouring district, the service and pricing are the same.
Common questions
Do you cover RM1 and nearby postcodes?
Yes. We cover Romford including RM1, and nearby towns such as Hornchurch and Dagenham. The survey and written quote are free.
Can you work from an existing inspection report for my Romford building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Do all fire doors need closers?
Most do. Exceptions include some doors kept locked shut and some doors within houses, depending on the fire strategy.
Can a fire door closer be too strong?
Yes. An over-powered or badly set closer makes the door hard to open and may lead people to wedge it. The goal is reliable closing with a reasonable opening force.