Riser and cupboard fire doors in Romford: what's involved
Our riser and cupboard fire doors service covers Romford and the wider Greater London area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Fire doors in Romford protect escape routes in restaurants, care homes and hotels alike. We adapt the programme to the building and its occupants, never the standard of the installation.
We match riser doors in Romford to the rating of the riser enclosure, not to whatever was there before. While fitting riser doors in Romford, we photograph any gaps in fire stopping we can see and pass them on to you.
The fire stopping behind the door
The door is only half the picture. Inside the riser, the services passing through each floor must be fire stopped. That is a separate specialist task. Where we find gaps or missing fire stopping while fitting riser doors, we record it and flag it to you so it can be addressed.
On a typical job that means:
- Signage as required
- Seals and frame gap sealing
- Locks and keep-locked arrangements as specified
- Fire-rated riser and cupboard doorsets
Rules and responsibilities in Romford
The rules that apply to fire doors in Romford are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts. Enforcement of fire safety law in Romford sits with the London Fire Brigade.
Where a Romford block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Where riser and cupboard fire doors fit in Romford
Typical settings for riser and cupboard fire doors include blocks of flats, hotels and office buildings. In Romford, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
The steps on a Romford installation
- Survey risers, cupboards and wall ratings
- Confirm locked-shut or self-closing for each door
- Order doorsets sized to the openings
- Install and seal frames, hang leaves
- Fit locks, seals and signage
- Photograph and report on visible fire stopping
Prices for riser and cupboard fire doors in Romford
Guide pricing for riser and cupboard fire doors: £450–£1,200 per riser or cupboard doorset supplied and fitted, ex VAT. Volume work across several doors in one Romford building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Romford
We also cover towns near Romford, including Hornchurch (2.9 km away), Dagenham and Becontree. If your building is in RM1 or a neighbouring district, the service and pricing are the same.
Common questions
Do you work in Romford?
Yes, we take on riser and cupboard fire doors in Romford and the surrounding area, including Hornchurch and Dagenham. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Romford?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do riser doors need closers?
Not if they are kept locked shut and the fire strategy allows it; they should then be labelled accordingly. Cupboards that are opened regularly normally need self-closers.
Can I use a standard access panel for a riser?
Only if it is a fire-rated product with evidence for the wall rating. Many ordinary access panels and cupboard doors are not fire rated.