FD60 fire doors in Worcestershire, done to the evidence
Across Worcestershire, from Worcester to Redditch, we survey, supply and fit FD60 fire doors for homes, blocks of flats and workplaces.
Before ordering FD60 doors for a Worcestershire building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in Worcestershire we generally fit certified doorsets, so frame and leaf share the same test evidence.
Worcestershire has a mix of buildings, from purpose-built blocks to converted houses and commercial premises. We tailor the programme to the building, not the other way round.
What do you hand over at the end?
For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.
Which fire door rules apply in Worcestershire?
In Worcestershire, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Worcestershire building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
From enquiry to handover in Worcestershire
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Budgeting for FD60 fire doors in Worcestershire
Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in Worcestershire as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Questions
Do you provide FD60 fire doors across Worcestershire?
Yes. We cover all of Worcestershire, including Worcester and Redditch. Surveys and written quotes are free.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.