FD60 fire doors in Royal Leamington Spa: what's involved
If you need FD60 fire doors in Royal Leamington Spa, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Around Royal Leamington Spa, HMOs, high-street shops and houses with integral garages all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
FD60 openings in Royal Leamington Spa buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. Before ordering FD60 doors for a Royal Leamington Spa building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer.
When does a building need FD60 rather than FD30?
FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.
We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.
What you get:
- Load-rated hinges and correctly powered closer
- 60-minute glazing systems where vision panels are needed
- Frame fixing and structural gap sealing recorded with photos
- Certified FD60 doorset or leaf with matching evidence
Fire door law for Royal Leamington Spa properties
Fire doors in Royal Leamington Spa fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Royal Leamington Spa above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Buildings and duty holders in Royal Leamington Spa
Landlords, managing agents, facilities teams and homeowners in Royal Leamington Spa can all commission FD60 fire doors from us. The usual settings are plant and boiler rooms and stair cores in taller blocks, though single doors for refuse stores are just as welcome.
Our process in Royal Leamington Spa
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
What does FD60 fire doors cost in Royal Leamington Spa?
Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in Royal Leamington Spa as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Covering Royal Leamington Spa and nearby
Nearby towns we cover include Warwick, Kenilworth and Coventry. Distance from Royal Leamington Spa does not change our guide prices, and the survey and quote are free.
Questions from Royal Leamington Spa
Do you cover CV31 and nearby postcodes?
Yes. We cover Royal Leamington Spa including CV31, and nearby towns such as Warwick and Kenilworth. The survey and written quote are free.
Can you work from an existing inspection report for my Royal Leamington Spa building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.

