FD60 fire doors in Renfrew, PA4

FD60 fire doors: our service in Renfrew

Our FD60 fire doors service covers Renfrew and the wider Renfrewshire & Inverclyde area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.

Buildings in and around Renfrew range from schools to houses with integral garages and small offices. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

FD60 openings in Renfrew buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Renfrew we generally fit certified doorsets, so frame and leaf share the same test evidence.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

On a typical job that means:

• Intumescent and smoke seals as specified
• 60-minute glazing systems where vision panels are needed
• Check of the fire strategy rating for each opening
• Load-rated hinges and correctly powered closer

Fire door law for Renfrew properties

Renfrew is in Scotland, which has its own system. Building work, including many fire door replacements, is governed by the Building (Scotland) Regulations 2004 and the Technical Handbooks, with Section 2 covering fire; where a building warrant is needed it comes from the local authority. In non-domestic premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 set the duties.

The common parts of private blocks of flats largely sit outside Part 3 of the 2005 Act, so the fire risk assessment and housing obligations usually drive fire door work in residential buildings in Renfrew.

Where FD60 fire doors fit in Renfrew

Typical settings for FD60 fire doors include refuse stores, stair cores in taller blocks and plant and boiler rooms. In Renfrew, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

Our process in Renfrew

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Budgeting for FD60 fire doors in Renfrew

Guide pricing for FD60 fire doors: £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. Volume work across several doors in one Renfrew building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Around Renfrew

Renfrew is about 5.1 km from Paisley, and we cover both, along with nearby Clydebank and Bearsden. Send us your postcode and we'll confirm survey dates.

Questions