Getting FD60 fire doors right in Greenock
From the PA15 postcode district outwards, we take on FD60 fire doors across Greenock for homes, blocks and workplaces.
Fire doors in Greenock protect escape routes in small offices, houses with integral garages and care homes alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Before ordering FD60 doors for a Greenock building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in Greenock we generally fit certified doorsets, so frame and leaf share the same test evidence.
Why FD60 installation is less forgiving
A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.
Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.
What you get:
- Certified FD60 doorset or leaf with matching evidence
- 60-minute glazing systems where vision panels are needed
- Load-rated hinges and correctly powered closer
- Frame fixing and structural gap sealing recorded with photos
The regulations behind fire doors in Greenock
Scottish rules apply to fire doors in Greenock. The Technical Handbooks under the Building (Scotland) Regulations 2004 set the standard for new and altered doors, and the local authority issues building warrants where they are needed. Workplaces and other non-domestic premises are covered by the Fire (Scotland) Act 2005.
Residential common parts in Greenock are treated differently from England, so we check the fire risk assessment and any landlord or factor requirements before specifying work.
Who needs FD60 fire doors in Greenock?
You are most likely to need FD60 fire doors if you look after refuse stores, stair cores in taller blocks or plant and boiler rooms. Whatever the building in Greenock, we survey each opening and tell you which doors need work and which do not.
Our process in Greenock
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Prices for FD60 fire doors in Greenock
As a guide, budget £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. The figure for your Greenock building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Around Greenock
We also cover towns near Greenock, including Vale of Leven (11.6 km away), Clydebank and Paisley. If your building is in PA15 or a neighbouring district, the service and pricing are the same.
Common questions
Is Greenock within your coverage area?
It is. We cover Greenock in Renfrewshire & Inverclyde and neighbouring towns such as Vale of Leven. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.