FD60 fire doors in North Yorkshire, done to the evidence
We provide FD60 fire doors across North Yorkshire, covering 6 towns and 51 postcode districts, including York, Middlesbrough and Harrogate.
Before ordering FD60 doors for a North Yorkshire building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in North Yorkshire we generally fit certified doorsets, so frame and leaf share the same test evidence.
Managing agents, landlords, schools, care providers, businesses and homeowners in North Yorkshire can all use one team for survey, supply, installation and evidence. We plan work around occupants and hand over a record for every door.
When does a building need FD60 rather than FD30?
FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.
We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.
Fire door law for North Yorkshire properties
England's framework applies in North Yorkshire. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in North Yorkshire, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
How a North Yorkshire job runs
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Prices for FD60 fire doors in North Yorkshire
If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Common questions
Do you provide FD60 fire doors across North Yorkshire?
Yes. We cover all of North Yorkshire, including York and Middlesbrough. Surveys and written quotes are free.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.