Getting FD60 fire doors right in Selby
Looking for FD60 fire doors in Selby? We supply and fit certified fire doors and components across Selby and the wider North Yorkshire area, working from a free survey and a fixed written quote.
Buildings in and around Selby range from care homes to houses with integral garages and small blocks of flats. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
FD60 openings in Selby buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Selby we generally fit certified doorsets, so frame and leaf share the same test evidence.
When does a building need FD60 rather than FD30?
FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.
We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.
On a typical job that means:
- Intumescent and smoke seals as specified
- Load-rated hinges and correctly powered closer
- Frame fixing and structural gap sealing recorded with photos
- Check of the fire strategy rating for each opening
Fire door law for Selby properties
The rules that apply to fire doors in Selby are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Selby block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Which buildings in Selby need FD60 fire doors?
Typical settings for FD60 fire doors include stair cores in taller blocks, mixed-use commercial buildings and refuse stores. In Selby, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
Our process in Selby
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
What does FD60 fire doors cost in Selby?
If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Covering Selby and nearby
Neighbouring towns such as Goole, Pontefract, York and Castleford are covered too, so clients with several buildings can use one installer and one evidence format.
Questions from Selby
Do you work in Selby?
Yes, we take on FD60 fire doors in Selby and the surrounding area, including Goole and Pontefract. Send your postcode and a few details and we'll come back with survey dates.
How quickly can you survey in Selby?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.