What FD60 fire doors in Loughborough should include
For property owners, landlords and managing agents in Loughborough, we offer FD60 fire doors with one team for the survey, the product and the installation.
In and around Loughborough, fire door work covers everything from schools to houses with integral garages. We plan each job around the people who use the building.
Before ordering FD60 doors for a Loughborough building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in Loughborough we generally fit certified doorsets, so frame and leaf share the same test evidence.
What do you hand over at the end?
For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.
Each installation includes:
- Certified FD60 doorset or leaf with matching evidence
- Frame fixing and structural gap sealing recorded with photos
- Load-rated hinges and correctly powered closer
- 60-minute glazing systems where vision panels are needed
The regulations behind fire doors in Loughborough
The rules that apply to fire doors in Loughborough are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Loughborough block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs FD60 fire doors in Loughborough?
Landlords, managing agents, facilities teams and homeowners in Loughborough can all commission FD60 fire doors from us. The usual settings are mixed-use commercial buildings and plant and boiler rooms, though single doors for refuse stores are just as welcome.
What happens after you enquire
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Prices for FD60 fire doors in Loughborough
Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in Loughborough as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Covering Loughborough and nearby
Nearby towns we cover include Coalville, Leicester and Long Eaton. Distance from Loughborough does not change our guide prices, and the survey and quote are free.
Common questions
Is Loughborough within your coverage area?
It is. We cover Loughborough in Leicestershire and neighbouring towns such as Coalville. There is no charge for the survey.
How quickly can you survey in Loughborough?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.