FD60 fire door installation in Manchester

Getting FD60 fire doors right in Manchester

Our FD60 fire doors service covers Manchester and the wider Greater Manchester area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.

Fire doors in Manchester protect escape routes in schools, restaurants and clinics alike. We adapt the programme to the building and its occupants, never the standard of the installation.

FD60 openings in Manchester buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. Before ordering FD60 doors for a Manchester building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

What you get:

• Check of the fire strategy rating for each opening
• Frame fixing and structural gap sealing recorded with photos
• Certified FD60 doorset or leaf with matching evidence
• Intumescent and smoke seals as specified

The regulations behind fire doors in Manchester

Fire doors in Manchester fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Manchester above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Which buildings in Manchester need FD60 fire doors?

Typical settings for FD60 fire doors include refuse stores, mixed-use commercial buildings and stair cores in taller blocks. In Manchester, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

What happens after you enquire

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Guide prices in Manchester

As a guide, budget £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. The figure for your Manchester building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Covering Manchester and nearby

Beyond Manchester itself we also cover nearby towns such as Salford (3.6 km), Old Trafford and Failsworth. The service, pricing and evidence are the same wherever you are.

Common questions